a ver que os parece esto (airbox corsa B)!!

He encontrado esto por una página inglesa, a ver que os parece

Está en inglés, pero no merece comentario alguno, ya que es muy sencillo...


<STRONG>You will need:</STRONG> (taladro, 2 brocas.... y ya esta!)

Air Box
Drill
1/4 inch drill piece
1/2 inch drill piece

Step 1: Locate your air box


http://www.giftedgeneration.com/foru...ngine_bay2.jpg

Step 2: Remove your air box

Mine was held o­n by 1 tag at the front, and held by 2 round rubber things at the back to stop the box moving, yours maybe slightly different

To take of the lid, undo the 2 clips o­n the right hand side (engine side) and reove the filter

Cut the tag at the bottom front and remove the air box


http://www.giftedgeneration.com/foru...7150_pic_8.jpg


http://www.giftedgeneration.com/foru...7214_pic_9.jpg

Step 3:

Drill random holes with a 1/4 inch drill piece BELOW YOUR AIR FILTER LINE, as in the below pic

Then o­nce you have drilled the 1/4 inch holes, drill them again but with a 1/2 inch drill piece like below


http://www.giftedgeneration.com/foru...48_1st_pic.jpg


http://www.giftedgeneration.com/foru...5084_pic_2.jpg


http://www.giftedgeneration.com/foru...5212_pic_3.jpg


http://www.giftedgeneration.com/foru...5347_pic_4.jpg


http://www.giftedgeneration.com/foru...5508_pic_5.jpg


http://www.giftedgeneration.com/foru...5656_pic_6.jpg


http://www.giftedgeneration.com/foru...5823_pic_7.jpg

Step 4:

Once you have drill the holes, replace the air box, replace the filter, replace the lid clicking the 2 catches back o­n and putting a new tag at the bottom front

Bish Bash Bosh Done

Results

On my car:

Very Very nice roar coming from it http://www.corsasport.co.uk/board/im...le/biggrin.gif http://www.corsasport.co.uk/board/im...le/biggrin.gif http://www.corsasport.co.uk/board/im...le/biggrin.gif
Cost nothing to do http://www.corsasport.co.uk/board/im...ile/thumbs.gif
Does not suck in hot air from the engine

By Luke Peters


Step 4:

Once you have drill the holes, replace the air box, replace the filter, replace the lid clicking the 2 catches back o­n and putting a new tag at the bottom front

Bish Bash Bosh Done

Results

On my car:

Very Very nice roar coming from it
Cost nothing to do
Does not suck in hot air from the engine

By Luke Peters[/img][img][/img]

Yo recuerdo haber hecho una chapuza de esas en mi gilera eaglet, con lo que conllevo que sonaba muy bien, pero gastaba el doble y andaba lo mismo, e incluso era mas peligroso por que me entraba mas mierda, pero vamos no se sera lo mismo. Pero ponerte a hacer agujeros en plan "ahorrativo" por no gastarse un duro en el coche. No se que resultado tendra ese invento en el coche.

(Estos ingleses son la ostia)

P.D: BIENVENIDO ANTOÑITO !!!!