Antoñito
16-03-04, 11:14
He encontrado esto por una página inglesa, a ver que os parece
Está en inglés, pero no merece comentario alguno, ya que es muy sencillo...
<STRONG>You will need:</STRONG> (taladro, 2 brocas.... y ya esta!)
Air Box
Drill
1/4 inch drill piece
1/2 inch drill piece
Step 1: Locate your air box
http://www.giftedgeneration.com/forum/uploads/club_classer_1055964608_engine_bay2.jpg
Step 2: Remove your air box
Mine was held o&shy;n by 1 tag at the front, and held by 2 round rubber things at the back to stop the box moving, yours maybe slightly different
To take of the lid, undo the 2 clips o&shy;n the right hand side (engine side) and reove the filter
Cut the tag at the bottom front and remove the air box
http://www.giftedgeneration.com/forum/uploads/club_classer_1055967150_pic_8.jpg
http://www.giftedgeneration.com/forum/uploads/club_classer_1055967214_pic_9.jpg
Step 3:
Drill random holes with a 1/4 inch drill piece BELOW YOUR AIR FILTER LINE, as in the below pic
Then o&shy;nce you have drilled the 1/4 inch holes, drill them again but with a 1/2 inch drill piece like below
http://www.giftedgeneration.com/forum/uploads/club_classer_1055964848_1st_pic.jpg
http://www.giftedgeneration.com/forum/uploads/club_classer_1055965084_pic_2.jpg
http://www.giftedgeneration.com/forum/uploads/club_classer_1055965212_pic_3.jpg
http://www.giftedgeneration.com/forum/uploads/club_classer_1055965347_pic_4.jpg
http://www.giftedgeneration.com/forum/uploads/club_classer_1055965508_pic_5.jpg
http://www.giftedgeneration.com/forum/uploads/club_classer_1055965656_pic_6.jpg
http://www.giftedgeneration.com/forum/uploads/club_classer_1055965823_pic_7.jpg
Step 4:
Once you have drill the holes, replace the air box, replace the filter, replace the lid clicking the 2 catches back o&shy;n and putting a new tag at the bottom front
Bish Bash Bosh Done
Results
On my car:
Very Very nice roar coming from it http://www.corsasport.co.uk/board/images/smile/biggrin.gif http://www.corsasport.co.uk/board/images/smile/biggrin.gif http://www.corsasport.co.uk/board/images/smile/biggrin.gif
Cost nothing to do http://www.corsasport.co.uk/board/images/smile/thumbs.gif
Does not suck in hot air from the engine
By Luke Peters
Step 4:
Once you have drill the holes, replace the air box, replace the filter, replace the lid clicking the 2 catches back o&shy;n and putting a new tag at the bottom front
Bish Bash Bosh Done
Results
On my car:
Very Very nice roar coming from it
Cost nothing to do
Does not suck in hot air from the engine
By Luke Peters[/img]
Está en inglés, pero no merece comentario alguno, ya que es muy sencillo...
<STRONG>You will need:</STRONG> (taladro, 2 brocas.... y ya esta!)
Air Box
Drill
1/4 inch drill piece
1/2 inch drill piece
Step 1: Locate your air box
http://www.giftedgeneration.com/forum/uploads/club_classer_1055964608_engine_bay2.jpg
Step 2: Remove your air box
Mine was held o&shy;n by 1 tag at the front, and held by 2 round rubber things at the back to stop the box moving, yours maybe slightly different
To take of the lid, undo the 2 clips o&shy;n the right hand side (engine side) and reove the filter
Cut the tag at the bottom front and remove the air box
http://www.giftedgeneration.com/forum/uploads/club_classer_1055967150_pic_8.jpg
http://www.giftedgeneration.com/forum/uploads/club_classer_1055967214_pic_9.jpg
Step 3:
Drill random holes with a 1/4 inch drill piece BELOW YOUR AIR FILTER LINE, as in the below pic
Then o&shy;nce you have drilled the 1/4 inch holes, drill them again but with a 1/2 inch drill piece like below
http://www.giftedgeneration.com/forum/uploads/club_classer_1055964848_1st_pic.jpg
http://www.giftedgeneration.com/forum/uploads/club_classer_1055965084_pic_2.jpg
http://www.giftedgeneration.com/forum/uploads/club_classer_1055965212_pic_3.jpg
http://www.giftedgeneration.com/forum/uploads/club_classer_1055965347_pic_4.jpg
http://www.giftedgeneration.com/forum/uploads/club_classer_1055965508_pic_5.jpg
http://www.giftedgeneration.com/forum/uploads/club_classer_1055965656_pic_6.jpg
http://www.giftedgeneration.com/forum/uploads/club_classer_1055965823_pic_7.jpg
Step 4:
Once you have drill the holes, replace the air box, replace the filter, replace the lid clicking the 2 catches back o&shy;n and putting a new tag at the bottom front
Bish Bash Bosh Done
Results
On my car:
Very Very nice roar coming from it http://www.corsasport.co.uk/board/images/smile/biggrin.gif http://www.corsasport.co.uk/board/images/smile/biggrin.gif http://www.corsasport.co.uk/board/images/smile/biggrin.gif
Cost nothing to do http://www.corsasport.co.uk/board/images/smile/thumbs.gif
Does not suck in hot air from the engine
By Luke Peters
Step 4:
Once you have drill the holes, replace the air box, replace the filter, replace the lid clicking the 2 catches back o&shy;n and putting a new tag at the bottom front
Bish Bash Bosh Done
Results
On my car:
Very Very nice roar coming from it
Cost nothing to do
Does not suck in hot air from the engine
By Luke Peters[/img]